Isuzu SUV Forum banner

brakes

3K views 3 replies 3 participants last post by  JoeIsuzu 
#1 ·
replaced driver side caliper. when i bleed it i get just an ooze of fluid and some air. bled it several times with same result. no brake pedal pressure builds up
 
#2 ·
Keep bleeding.

Leave the bleeder screw open while topping up the m/c reservoir as necessary until fluid starts to come out under gravity, then bleed as normal.
 
#3 ·
gravity bled brakes, fluid and air came out. air never stopped coming out of the caliper and when i push the brake pedal down air bubble are coming in to the master cylinder reservoir. is the master cylinder bad? i have only fluid coming out of the rear and lots of air coming out of the front.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top