Page 1 of 1

No power at all 1999 Isuzu rodeo

PostPosted: Sun Jan 08, 2017 7:42 pm
by Lzgmer
So I recently had to change the gaskets on my intake manifold for my 1999 Rodeo 6cyl. Got everything out and back in fairly easily with only having to replace a few radiator hoses. When I went to turn it over to check that everything was good, the light came in on my dash and I heard the fuel pump go off, but when I turned the key to start the whole thing went dead and just clicked. Now when I turn the key there is no power at all even though the battery is charged. Fuses look good too and I double checked all my connections to make sure everything was plugged in. Any advise?

Re: No power at all 1999 Isuzu rodeo

PostPosted: Mon Jan 09, 2017 6:49 am
by Buster28
Are there any illuminated lamps on instrument panel when the ignition switch is in the Run position?
Will the headlamps illuminate?
Does the horn sound when operated?

Re: No power at all 1999 Isuzu rodeo

PostPosted: Tue Jan 10, 2017 6:39 pm
by Lzgmer
No to all three, it's as if there is no power getting anywhere in the vehicle.

Re: No power at all 1999 Isuzu rodeo

PostPosted: Tue Jan 10, 2017 7:16 pm
by Buster28
It appears that the battery is completely dead or the battery cables are not connected.
Click on image to expand.

Re: No power at all 1999 Isuzu rodeo

PostPosted: Tue Jan 10, 2017 7:28 pm
by Lzgmer
The battery is fully charged, but I will try an check the connections. Thanks for the diagram!