John's Auto to Manual MUA5 Transmission Swap

Discuss anything related to drivetrain mods here (Engine &Transmission Swaps, lift, gearing, exhaust, etc)

Moderator: Staff

Re: John's Auto to Manual MUA5 Transmission Swap

Postby tovenaar » Sat Apr 02, 2016 11:44 am

So im thinking of doing a mua5 swap on my 01 rodeo sport 4x4

I'm wondering if there is an additional ground clearance gain with the mua5 ?

I see early in this thread the guy reused the original auto cross member flipped around but it sounds like he had to add a spacer to sit level and make the bolts fit. Would the mua5 cross member sit a bit higher ? Does the mua5 itself sit higher ?

Last time I was out where I shouldn't have been I found my t-case was the biggest clearance issue..thankfully it has a skid plate. Hoping the mua5 sits higher in the frame instead of below it ...
2001 Rodeo Sport V6 4x4 Automatic 205k

265/75 cooper adventurers , Indy torsion bars 2" cranked , 913's on 1" poly spacers , superwinch hubs
Bilstein rear shocks from a 4runner Bilstein front shocks ,rboth sway bars removed , rear brake line extension , custom rear bumper with swing out bicycle carrier , arb front bumper , 9500 lb Smitty built wenck, custom hi lift tire carrier , rear seat removed , custom sub woofer/lock box across rear foot well. JVC stereo , Sony explode speakers and an old 10" sub.
tovenaar
Drives on Gravel
 
Posts: 47
Joined: Wed Jun 06, 2012 9:20 pm
Location: Minneapolis , MN
Has thanked: 0 time
Have thanks: 0 time

Sponsor
 

Re: John's Auto to Manual MUA5 Transmission Swap

Postby Jaloro11 » Tue Jun 07, 2016 9:33 pm

Has anyone responded to your post at all. I'm looking to possibly do same thing with my 01 rodeo
Jaloro11
Drives on Pavement
 
Posts: 3
Joined: Tue Jun 07, 2016 7:57 pm
Has thanked: 0 time
Have thanks: 0 time

Re: John's Auto to Manual MUA5 Transmission Swap

Postby tovenaar » Fri Jul 01, 2016 11:46 pm

No responses ......
2001 Rodeo Sport V6 4x4 Automatic 205k

265/75 cooper adventurers , Indy torsion bars 2" cranked , 913's on 1" poly spacers , superwinch hubs
Bilstein rear shocks from a 4runner Bilstein front shocks ,rboth sway bars removed , rear brake line extension , custom rear bumper with swing out bicycle carrier , arb front bumper , 9500 lb Smitty built wenck, custom hi lift tire carrier , rear seat removed , custom sub woofer/lock box across rear foot well. JVC stereo , Sony explode speakers and an old 10" sub.
tovenaar
Drives on Gravel
 
Posts: 47
Joined: Wed Jun 06, 2012 9:20 pm
Location: Minneapolis , MN
Has thanked: 0 time
Have thanks: 0 time

Re: John's Auto to Manual MUA5 Transmission Swap

Postby andy120 » Mon Jul 04, 2016 3:49 am

Did it have ABS in it before the conversion?
andy120
Drives on Pavement
 
Posts: 13
Joined: Mon Jul 04, 2016 3:40 am
Has thanked: 0 time
Have thanks: 0 time

Re: John's Auto to Manual MUA5 Transmission Swap

Postby totten » Mon Jul 04, 2016 5:30 pm

Really nice pics. and write up on swap. Great job !! JWOODS :twisted:
2004 rodeo 4x4,3.2,auto Calmini 3" lift, Zone 2" Body Lift, 285/75/16 Mastercraft Courser HXT Tires. Cobra 29LTD CB,Transmission cooler,Functional hood scoop,Skyjacker shocks 8000,Swaybars removed.
User avatar
totten
Zu Royalty
 
Posts: 1449
Joined: Mon Feb 08, 2010 10:42 am
Location: Erlanger,Ky
Has thanked: 3 times
Have thanks: 77 times

Re: John's Auto to Manual MUA5 Transmission Swap

Postby Redman06 » Fri Sep 16, 2016 1:58 pm

Is the mua5 a pull or push type clutch?
Redman06
Drives on Pavement
 
Posts: 5
Joined: Mon Sep 12, 2016 9:13 am
Has thanked: 2 times
Have thanks: 0 time

Re: John's Auto to Manual MUA5 Transmission Swap

Postby lorenzo816 » Tue Sep 20, 2016 9:39 am

I think John has been busy. But he has been on the board this month. PM him if you really want some answers on the swap

But to help a few of you....

pull vs. push clutch:
https://www.youtube.com/watch?v=Sf0g1BzkDjI
1997 Solid Axle Rodeo :: Ar5 swap :: Revo 4Lo :: 5.29/5.36 :: Front OX :: Rear ARB :: Full Float
MY Pictures and Videos and Build: 3-link coilover front 44 & rear FZJ80 on 37's
Uwharrie was my backyard - PM me if you need anything
User avatar
lorenzo816
Almost Joe Isuzu
 
Posts: 2981
Joined: Wed Jul 19, 2006 2:36 pm
Location: North Carolina
Has thanked: 79 times
Have thanks: 50 times

Re: John's Auto to Manual MUA5 Transmission Swap

Postby asghilo » Fri Jan 20, 2017 10:16 am

Redman06 wrote:Is the mua5 a pull or push type clutch?


MUA5 is pull clutch so make sure you get a quality kit w/ matching TO bearing so it doesn't pull out of the collar
1993 Trooper, 3.2L, 5spd
asghilo
Trail Master
 
Posts: 678
Joined: Thu Feb 12, 2009 6:07 am
Has thanked: 4 times
Have thanks: 41 times

Re: John's Auto to Manual MUA5 Transmission Swap

Postby silverfox » Sat Mar 18, 2017 7:36 pm

So ive been reading this thread, i have a 2000 rodeo 4x4 and want to swap to manual...my local u pull it has a first gen rodeo with the manual i think its a 92 model but i dont remember. They also have a 97 trooper which is what i was interested in because of this thread but im somewhat confused about the transfer case...on johns he used the 95 because of less wiring and somewhere i read the 97 is different? Did i read that right and if so what electrical is different from johns swap? I was wanting to do the same swap because of all the info in this along with the awesome pics.
silverfox
Drives on Dirt
 
Posts: 52
Joined: Mon Mar 13, 2017 5:19 pm
Has thanked: 0 time
Have thanks: 0 time

Previous

Return to Drivetrain Mods

Who is online

Users browsing this forum: No registered users and 2 guests