94 amigo 4x4 part out

This is the place to post if you have something to sell or are in need of a part (No commercial posts)

Moderator: Staff

94 amigo 4x4 part out

Postby lowzone » Sat Dec 10, 2016 1:08 pm

just got in, rotted to death. not much left. mostly front suspension and rear axle (rusty) 68,500 miles on her. GREY 150 interior code.




what i know i have:

MAF
air box assembly
ECM
full padded door panels (minor scuff or mark on each)
door handles (Chrome)
inside door handles/ door pull cups
Double DIN Radio cover and mount (brace)

very nice Chrome tail lights
tilt steering column

p/s pump

Emission valves (valve cover mounted and fenderwell) whole set
alternator (used, worked but no warranty other than no DOA)
front and rear drive shafts (slip joint on BOTH)

i also have a ton of misc parts from other trucks/suvs ive parted over the years. let me know what you need and ill see what i have

Thanks
Ron

[email protected]
201-983-3176 texts welcome.
Last edited by lowzone on Sun May 14, 2017 1:24 pm, edited 1 time in total.
if i build it, it will scrape..........or catch on fire
Image
I'm not a mechanic, but i played one in my garage......
User avatar
lowzone
I am the Stig
 
Posts: 7180
Joined: Thu Mar 25, 2004 12:27 pm
Location: Bergen County NJ/Catawba County NC
Has thanked: 51 times
Have thanks: 37 times

Sponsor
 

Re: 94 amigo 4x4 part out

Postby 99SuperTrooper » Wed Dec 14, 2016 1:59 pm

Interested in the Aisin hubs. Will they work on a 99 Trooper with SOTF hubs now?
Image
99 Trooper CAPTAIN PHASMAâ„¢
5speed
2nd owner
235/85R16 BFGoodrich All-Terrain TA KO
to be continued
User avatar
99SuperTrooper
Drives on Pavement
 
Posts: 15
Joined: Tue Dec 13, 2016 11:19 pm
Has thanked: 5 times
Have thanks: 0 time

Re: 94 amigo 4x4 part out

Postby mpallens » Sun Dec 18, 2016 9:38 am

I need the torsion bar brackets/sockets and adjusters. Everything for torsion bar setup minus the bars themselves.
mpallens
Drives on Gravel
 
Posts: 46
Joined: Tue Aug 28, 2007 6:19 pm
Location: Lorain, Ohio
Has thanked: 0 time
Have thanks: 1 time

Re: 94 amigo 4x4 part out

Postby travisc1987 » Mon Dec 26, 2016 1:39 am

You have the trim piece that goes on the floor around the shifter? And the pretty much everything from the climate control down in the center of the dash ( ash tray I think, radio trim piece) if so how much $$$
travisc1987
Drives on Pavement
 
Posts: 11
Joined: Sun Oct 30, 2016 9:27 pm
Has thanked: 0 time
Have thanks: 0 time

Re: 94 amigo 4x4 part out

Postby lowzone » Tue Dec 27, 2016 1:41 pm

no idea why im not getting notified.

i have the shifter surround, but have to check its condition. i think the leather boot is shot. ill check today.
i have ashtrays and other parts, HVAC controls....i sold the radio surround already. let me know exactly what you need, piece by piece or pictures.

MPallens: i got the adjusters, bolt and that 1/2 round nut for both sides. let me get it all together and and figure it will be cheapest to go Flat rate USPS.


texts are welcome to 201-983-3176

Ron
if i build it, it will scrape..........or catch on fire
Image
I'm not a mechanic, but i played one in my garage......
User avatar
lowzone
I am the Stig
 
Posts: 7180
Joined: Thu Mar 25, 2004 12:27 pm
Location: Bergen County NJ/Catawba County NC
Has thanked: 51 times
Have thanks: 37 times

Re: 94 amigo 4x4 part out

Postby shaggy » Sat May 13, 2017 11:05 pm

do you have one the plastic door pulls?
shaggy
Drives on Pavement
 
Posts: 18
Joined: Sun Jul 10, 2016 10:57 am
Has thanked: 0 time
Have thanks: 0 time

Re: 94 amigo 4x4 part out

Postby lowzone » Sun May 14, 2017 10:20 am

Oh definitely got a dozen or so if them. 5.00 each plus shipping
if i build it, it will scrape..........or catch on fire
Image
I'm not a mechanic, but i played one in my garage......
User avatar
lowzone
I am the Stig
 
Posts: 7180
Joined: Thu Mar 25, 2004 12:27 pm
Location: Bergen County NJ/Catawba County NC
Has thanked: 51 times
Have thanks: 37 times


Return to Classifieds

Who is online

Users browsing this forum: No registered users and 2 guests

cron