As per the norm, if you have/need anything, post it up here.
I have a set of 4 brand new Dakota Definity A/Ts mounted and balanced on 16" Vehicross chrome rims available. They are 30" ish IIRC. I will have to go out to the shed and look. They have maybe 300 miles on them. Original thought was to swap between street tires and mud tires to save on fuel and so on. Turns out, I am way too lazy for that. Shoot me a PM if interested, I will get some pics if anyone is interested.
I have acquired a set of late Amigo alloys 16in. Belong to a friend, would take 100 for all of them. Deliver to ure or meet in between during trip.
He got these to put on his Montero, but the centers are too small.
If my new tires / lift stuff get shipped in time to get my truck ready for Uwharrie, I'll have four 265/75-16 Nitto Terra Grappler take-offs available. That should be just under a 32" tire. They still have some tread left. I'll take best offer for them if anyone needs 'em. I can throw them in the bed and take them next week.
If my new tires / lift stuff get shipped in time to get my truck ready for Uwharrie, I'll have four 265/75-16 Nitto Terra Grappler take-offs available. That should be just under a 32" tire. They still have some tread left. I'll take best offer for them if anyone needs 'em. I can throw them in the bed and take them next week.
Still looking for a dipstick tube for a 3.2L. The one on the RS popped out again, the bracket that holds it in place has a broken bolt on the engine side, no way to get to it without taking the exhaust and whatnot off. Made a mess the other day, didn't lose enough oil to matter, but what did spatter out was everywhere...not a good thing. I am going to try and fab a bracket that I can connect somewhere at the bottom above the flare, should hold it in place well enough. Good thing the 3.2 doesn't burn oil like the 3.5 and require constant oil checking!
An AC compressor with the fittings would be nice too Hers is dying and the hard pipe that comes off the high pressure side has a tiny crack in it. it will hold freon for a few months, but thats it.
Still looking for 2 or 3 6x5.5 16" rims with a deeper offset, don't care if they have road rash, I want to put them on my trailer, need the deeper offset to clear the trailer frame with 30" + tires. If not, I will just buy some cheap AR crawler steelies and slap my tires on them. Just thought it would be cool to recycle some Isuzu rims on the trailer The VX chrome rims have virtually no offset and I don't think the 30X10 tires I have will fit, at least not with any axle movement.
I've got a set of factory 15" steel wheels, chrome trim rings and center caps I'm trying to get rid of... I threw them up on Craigslist for $75 OBO but will take pretty much any reasonable offer from someone in the "family" so to speak. I'll be driving down Saturday morning with my daughter if anyone is interested. Here's a link to the Craiglist post that has a few pics:
I'll be coming around the bypass some time Sunday evening and could meet up and drop off tires if you want to bring them to Arrowhead.
chitzu with special edition Bighorn Jr. on trailer. LOL
Ok folks. Last call on anything you may need off this 86. I'll be boxing up everything I can get into our rigs for the trip down. If you have a specific part in mind, you may want to let me know so I can be sure it gets there. Let me know.
I have a set of 1st gen amigo fenders that I am looking to get rid of, Asking $75
OME 912's Very little use $150
Also have a bunch of 2nd gen Rodeo/Amigo parts laying around here, If you need something let me know and I can give you a price and can bring to URE
I Want You To Want Me
I've got stuff. Too much stuff. Here, look at some of it: Stuff
If you'd like some of it, come see us in the Vehicross with bats on it at Uwharrie on Saturday. I NEED to move this stuff, maybe into the landfill. Ask me about it.
Also, I've got a soft top for a '98-'02 Amigo/Rodeo Sport that I've had listed on the Planet. I'll bring it if anyone is interested. It's got EVERYTHING you need to go from a hard top to a soft top: top, frame, covers, latches, hardware, etc. The top is virtually new-- as in on the truck one day, off the next. And it's been in my garage since. And now that I don't have an Amigo...... Yes, then there's stuff I don't have photos of. A set of manual window regulators for an Amigo/Rodeo. 2.2 gaskets, and main or rod bearings, don't remember which. A 2.2 starter with part of it's housing broken off. You know THAT'S worth a pretty penny-- but it could be your's-- it you want it. If no one claims it, it will end up in the dump,so COME ON. The only thing I don't get rid of is Isuzu screws. I keep ALL of them.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Isuzu SUV Forum
895.9K posts
38.1K members
Since 2003
A forum community dedicated to Isuzu SUV owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!