Rodeo Keyless Entry Programming

Here are all of the best threads. Alert an admin to nominate a thread

Moderator: Staff

Rodeo Keyless Entry Programming

Postby Tad » Sun Mar 12, 2006 12:38 pm

1. Open then close door.
2. Using the key in the door lock, turn to lock then press unlock on the remote 3 times within 10 seconds.
3. Open and close door twice.
4. Repeat step 2.
User avatar
Tad
Site Admin
 
Posts: 5576
Joined: Mon Jun 23, 2003 9:02 pm
Location: Wandering Around
Has thanked: 121 times
Have thanks: 95 times

Sponsor
 

Postby Blue » Tue Mar 28, 2006 12:15 am

Is this the same procedure when adding an additional remote? I don't want to disable the one I have. I thought I saw this as involving turning the key in the ignition a number of times?? Opening and closing the door?? Thanks!
2002 Rodeo LS 4X4
V6
Automatic
105k miles
Trooper coil springs
16 75 245 LTX
Monroe Sensatracs...that's right, I'm cheap!
User avatar
Blue
Trail Master
 
Posts: 531
Joined: Wed Mar 08, 2006 4:04 pm
Location: Centennial/Denver area
Has thanked: 0 time
Have thanks: 1 time

Postby Gizmo42 » Sat Apr 29, 2006 11:45 pm

I havent tried Tads method so dont know if it wipes out previous remotes.

This is from the FAQ

'98 - '02 Isuzu Rodeo and Trooper (with factory keyless entry) Instructions for programming

1. Get in car and make sure all doors are unlocked.
2. Open driver's door and leave open.
3. Put key in ignition.
4. Turn key to 'on position' (dash lights on, but do not start) and back to 'off position' 3 times in 5 seconds or less. (you must turn the key very fast)
5. Close and open driver's door 2 times in 5 seconds or less.
6. Turn key to 'on position' and back to 'off position' 5 times in 5 seconds or less. (turn key very fast)
7. Close and open driver's door the doors should lock and unlock twice after this happens push the lock or unlock button on the remote, doors will lock and unlock. Push the lock or unlock button a second time and doors will lock and unlock again.

You are finished! The above sequence erases all previous codes and adds the new code as #1.

If you are adding a second remote, you should follow the same sequence with the exception of step 6; instead of turning the key to the 'on position' and back to the 'off position' 5 times in 5 seconds or less, do it 3 times in 5 seconds or less and then continue to step 7. ***Remember to turn the key to the on and off position very fast.

ON= just before start position, dash lights on
OFF= all the way off to lock position, not ACC
--Dave
Image
onetouch wrote:You're doomed Giz.

For this post the author Gizmo42 was thanked by:
bcfomega
User avatar
Gizmo42
Subscriber
 
Posts: 11467
Joined: Fri Sep 16, 2005 11:15 pm
Location: Aurora, Co.
Has thanked: 11 times
Have thanks: 132 times

Postby tOnKaTrAcKeR » Mon May 08, 2006 4:50 pm

will this work on a 97 trooper??
User avatar
tOnKaTrAcKeR
Trail Scout
 
Posts: 396
Joined: Sat Jan 07, 2006 8:06 pm
Location: Norfolk, VA
Has thanked: 0 time
Have thanks: 1 time

Postby Cronk » Fri Aug 25, 2006 8:24 pm

How do I get mine to stop automatically locking?
User avatar
Cronk
Subscriber
 
Posts: 6816
Joined: Sun Dec 18, 2005 3:41 am
Location: Kokomo, Indiana
Has thanked: 122 times
Have thanks: 91 times

97 rodeo reprogrammin

Postby lorenzo816 » Mon Oct 08, 2007 11:52 am

I think I should add to this post with the Instructions for the 97 rodeo.
http://forum.planetisuzoo.com/viewtopic.php?t=12541&highlight=reprogramming

and if anyone has that spare remote I need please PM me.
1997 Solid Axle Rodeo :: Ar5 swap :: Revo 4Lo :: 5.29/5.36 :: Front OX :: Rear ARB :: Full Float
MY Pictures and Videos and Build: 3-link coilover front 44 & rear FZJ80 on 37's
Uwharrie was my backyard - PM me if you need anything
User avatar
lorenzo816
I am the Stig
 
Posts: 3063
Joined: Wed Jul 19, 2006 2:36 pm
Location: North Carolina
Has thanked: 84 times
Have thanks: 64 times

Postby atfdmike » Tue Nov 27, 2007 4:50 pm

Image
Mike

94 Trooper SE
3.2 L V6 DOHC, Auto w/cooler,Aisins,Poly Sway Bar Bushings, Sway-Away Torsion Bars, Rancho 5000 shocks, Cadillac "A" note dual horns, Retrofit Multimeter, Driver side interior assist handles

"cerca trova"
User avatar
atfdmike
Zu Royalty
 
Posts: 1103
Joined: Fri May 19, 2006 8:52 am
Location: Michigan
Has thanked: 0 time
Have thanks: 0 time

Postby dgaf82 » Mon Feb 07, 2011 7:10 pm

This VERY OLD thread saved my butt about 30 minutes ago ! I ordered a keyless entry off ebay last week for my 01' Rodeo and they gave me instructions that werent working and i did them exactly by there book . Looked on here and the steps Gizmo put up worked instantly and funny cause the instructions that came with it were worlds apart in how to program it .
Green 2001 Rodeo LS 4wd
All stock and love it fine that way "for now"
dgaf82
Drives on Gravel
 
Posts: 30
Joined: Sun Jan 23, 2011 3:38 am
Location: Raleigh,NC
Has thanked: 0 time
Have thanks: 0 time

Postby IsuzuRodeo02 » Tue Mar 01, 2011 12:40 am

Did this yesterday! Worked like a charm. If it's not working for you, chances are you're not doing it fast enough (at least that was my experience.)

This thread ROCKS! Totally saved us from having to visit the dealer. Free home remedies FTW. Thank you!
IsuzuRodeo02
Drives on Pavement
 
Posts: 1
Joined: Tue Mar 01, 2011 12:32 am
Has thanked: 0 time
Have thanks: 0 time

Postby ElectricCity » Thu Mar 10, 2011 7:30 pm

i got a remote off of ebay, its used, its supposed to be a tested unit. When i program my alarm following the steps i can get it to work after the initialization but after that the only part of the button that works is the lock not the unlock....meaning if i program the system then at the last step where it say press either lock or unlock and the car will lock and unlock both lock or unlock buttons will operate the system but after that the only thing that operates the system is the lock button...now im lost...please help

99 passport thanks

mine also locks and unlocks only once after i do the steps
Image
Image
User avatar
ElectricCity
Rodeo King
 
Posts: 193
Joined: Wed Feb 09, 2011 3:48 pm
Location: Electric City Ny
Has thanked: 0 time
Have thanks: 0 time

Postby gblinker182 » Thu May 12, 2011 2:53 pm

ElectricCity wrote:i got a remote off of ebay, its used, its supposed to be a tested unit. When i program my alarm following the steps i can get it to work after the initialization but after that the only part of the button that works is the lock not the unlock....meaning if i program the system then at the last step where it say press either lock or unlock and the car will lock and unlock both lock or unlock buttons will operate the system but after that the only thing that operates the system is the lock button...now im lost...please help

99 passport thanks

mine also locks and unlocks only once after i do the steps




I just bought a remote off ebay for $21 and it came with instructions for my Rodeo and they worked first time, The instructions said:

Open the Drivers door and unlock all doors
Put key in ignition and turn to the ACC and Back to LOCK position 3X within 10 Seconds
Close and Open the door 2X within 10 seconds
Turn the Ignition to the ACC and back to LOCK position 3X within 10 seconds
Close and Open the door 1X and watch for confirmation that the locks cycle 2X
Then Press LOCK on your remote within 20 seconds watch for locks to cycle 1X
Then press UNLOCK button within 20 seconds and watch for locks to cycle 1X
Pull Key Out Close Driver door and You're done! Test your remote.
If you leave the driver door open and press lock on the remote your horn will just beep in pattern.
1999 Rodeo LSE 4x4 White with grey Leather interior
Full Audio system Upgrade, Infinity Reference Interiors and One 12'' Kicker Solo Classic Sub
Pioneer Deck
Work In Progress
Live Love Burn Die.
gblinker182
Drives on Dirt
 
Posts: 50
Joined: Thu Apr 14, 2011 2:53 am
Location: Oregon
Has thanked: 0 time
Have thanks: 0 time

Postby gblinker182 » Thu May 12, 2011 2:58 pm

Oh yah been meaning to ask if anyone her knows how to Turn the horn off from honking when I use my keyless entry, not too fond of the horn sound.
any help is much appreciated

Thanks!

******EDIT********

I figured out how to solve my problm, under the hood i just unplugged the little power leads to the little honker, it does not affect the horn or the panic button whatsoever and I dont get annoyed :)
1999 Rodeo LSE 4x4 White with grey Leather interior
Full Audio system Upgrade, Infinity Reference Interiors and One 12'' Kicker Solo Classic Sub
Pioneer Deck
Work In Progress
Live Love Burn Die.
gblinker182
Drives on Dirt
 
Posts: 50
Joined: Thu Apr 14, 2011 2:53 am
Location: Oregon
Has thanked: 0 time
Have thanks: 0 time

Re: Rodeo Keyless Entry Programming

Postby gm.anthony3 » Tue Jan 17, 2012 1:16 pm

i cant stand the lil honker either! thanks , ill go unhook the leads now! :D
99 RODEO 4WD
91 TALON TSI AWD
User avatar
gm.anthony3
Drives in Mud
 
Posts: 92
Joined: Mon Nov 28, 2011 6:26 pm
Location: VA
Has thanked: 5 times
Have thanks: 1 time

Re: Rodeo Keyless Entry Programming

Postby gm.anthony3 » Sat Jan 12, 2013 2:36 pm

UN hooking the leads worked great, ahhhhh......much
User avatar
gm.anthony3
Drives in Mud
 
Posts: 92
Joined: Mon Nov 28, 2011 6:26 pm
Location: VA
Has thanked: 5 times
Have thanks: 1 time

Re: Rodeo Keyless Entry Programming

Postby Chrisnif » Mon Jan 18, 2016 11:50 am

I got a set of keyfobs and when I do the programming procedure for my 1999 rodeo the locks cycle when I press the button during programming - then they cycle 2-3 times after I hit the unlock button - but after removing the key the keyfobs don't work. Any help ?
1999 Rodeo LS 3.2 2wd - 215k miles
1995 Trooper Limited 3.2 4wd - 235k miles
Still stock for the time being.
Chrisnif
Drives on Gravel
 
Posts: 42
Joined: Mon Aug 03, 2015 9:11 pm
Location: Charlotte NC
Has thanked: 0 time
Have thanks: 2 times


Return to Hall of Fame

Who is online

Users browsing this forum: No registered users and 1 guest