Lug pattern

What fits and What performs

Moderator: Staff

Lug pattern

Postby Ogresmash » Sun Dec 18, 2016 4:03 pm

Whats the lug pattern/spacing on an 01 rodeo lse?
Ogresmash
Drives on Pavement
 
Posts: 8
Joined: Sun May 29, 2016 10:05 pm
Has thanked: 0 time
Have thanks: 0 time

Sponsor
 

Re: Lug pattern

Postby JoeIsuzu » Sun Dec 18, 2016 9:36 pm

Ogresmash wrote:Whats the lug pattern/spacing on an 01 rodeo lse?

The entire internet seems to be in agreement that it's 6x139.7 (mm). ;)

Jack
Original owner, 1983 Isuzu P'up LS Diesel. Engine overhauled by JLEMOND. Ready for new paint now!
1994 Isuzu Amigo 2wd
IsuzuPup.com
"There are no dumb questions"?! Maybe not...
but there are smart ways to ask. Old, but classic:
How To Ask Questions The Smart Way
JoeIsuzu
Zu Royalty
 
Posts: 1901
Joined: Fri Jul 13, 2007 9:37 pm
Location: Germantown (next to Elvistown), TN
Has thanked: 73 times
Have thanks: 76 times

Re: Lug pattern

Postby Ed Mc. » Sun Dec 18, 2016 10:58 pm

Yes, it's the standard old Chevy/Datsun/Toyota 6-lug x 5.5" bolt pattern used for years until the mfr's got crazy and changed the bolt center diameter.

If you're looking for replacement wheel(s), you must ensure that the center hole is at least 108mm (4.25") in diameter or it won't fit over the hubs.

Here's a pretty cool wheel cross-reference site:

http://www.roadkillcustoms.com/hot-rods ... z3JOjzx6kZ

And I stumbled up on this site which is neat 'cause it shows what years had what style of wheels, with diameter/width info:

http://www.finishlinewheels.com/ISUZU/RODEO/2001/

HTH..........ed
'90 3.4 Troop LS;
'89 Troop RS (Exhaust Valve Challenged), now gone to a Good Home!
Yes, I am a Trooper-Holic!!!
Keep On Troopin' !
Ed Mc.
Almost Joe Isuzu
 
Posts: 2741
Joined: Thu Aug 14, 2003 1:26 am
Location: Poulsbo, WA
Has thanked: 5 times
Have thanks: 205 times

Re: Lug pattern

Postby egagnon086 » Mon Dec 19, 2016 7:30 am

My 02 rodeo sport had 100mm openings for the hub on the OEM wheels.
egagnon086
Zu Royalty
 
Posts: 1228
Joined: Sat Jun 04, 2011 9:32 pm
Location: Athens, GA
Has thanked: 53 times
Have thanks: 92 times

Re: Lug pattern

Postby Ed Mc. » Mon Dec 19, 2016 2:52 pm

egagnon086 wrote:My 02 rodeo sport had 100mm openings for the hub on the OEM wheels.


Was that a 2WD? Otherwise they must have changed something on the later models.
'90 3.4 Troop LS;
'89 Troop RS (Exhaust Valve Challenged), now gone to a Good Home!
Yes, I am a Trooper-Holic!!!
Keep On Troopin' !
Ed Mc.
Almost Joe Isuzu
 
Posts: 2741
Joined: Thu Aug 14, 2003 1:26 am
Location: Poulsbo, WA
Has thanked: 5 times
Have thanks: 205 times

Re: Lug pattern

Postby egagnon086 » Mon Dec 19, 2016 3:26 pm

No both were 4wd
egagnon086
Zu Royalty
 
Posts: 1228
Joined: Sat Jun 04, 2011 9:32 pm
Location: Athens, GA
Has thanked: 53 times
Have thanks: 92 times

Re: Lug pattern

Postby geoffinbc » Thu Dec 22, 2016 3:15 am

The late modes with slip on rotors used unit bearings and did not have the big hub with drive flanges or locking hubs. They should fit most common wheels.
1990 Trooper, 3.2L (3.1L .040 over) Pushrod V6, 5 speed manual. 33X10.50X15 BFG M/T KM2's. 3" OME Lift. Cowl Induction Intake. ARB Lockers front and rear. HD Tierods.
Off the road for an overhaul right now.

Big Bore Intake Kits & Greasable Shackles Here
User avatar
geoffinbc
I am the Stig
 
Posts: 6683
Joined: Sat Dec 01, 2007 2:44 am
Location: Chilliwack, BC, Canada
Has thanked: 8 times
Have thanks: 323 times


Return to Wheels & Tires

Who is online

Users browsing this forum: No registered users and 4 guests