GM 3.5 timing chain too loose? (see video)

A forum to post about other vehicles (ex: post about your Toyota that won't start)

Moderator: Staff

GM 3.5 timing chain too loose? (see video)

Postby dryvr12 » Wed May 17, 2017 7:43 pm

I picked up a replacement engine for an 06 g6 3.5 that I am going to flip. I have posted on the pontiac forum, but there isn't much activity. Do you think this is too loose? Engine supposedly has 52k miles.

https://www.youtube.com/watch?v=y3kMS1d ... e=youtu.be
Zack
Image

1988 Trooper LS 2.6L Auto to manual swap, Asin hubs, 228k+
http://forum.planetisuzoo.com/viewtopic.php?f=15&t=50707
LED gauges, sony h/u, alpine speakers, jl audio w3's, grant steering wheel, cup holders, procomp 98s

Odometer correction: http://forum.planetisuzoo.com/viewtopic.php?f=1&t=67546
Dome light fix: http://forum.planetisuzoo.com/viewtopic.php?f=17&t=62898
LEDs:http://forum.planetisuzoo.com/viewtopic.php?f=1&t=51643
User avatar
dryvr12
Zu Royalty
 
Posts: 1483
Joined: Sun Dec 12, 2010 12:33 pm
Location: Valparaiso, IN
Has thanked: 0 time
Have thanks: 43 times

Sponsor
 

Re: GM 3.5 timing chain too loose? (see video)

Postby Von » Thu May 18, 2017 8:54 am

Nah, I'd run that.
2004 Pontiac Grand Prix GTP
1990 Trooper 2.8 V6 Auto (Wrecked... sent to the crusher)
1993 Shortbed, regular cab Z71 (Donated to step-son #2)(deceased, parted out)(Forums for GM and fullsize 4X4s suck... so I'm still hanging out here)
1965 Ford Fairlane 500 Sports Coupe 289 & 4 speed (some assembly required)
1968 Kaiser M715, Chevy 350/700r4, stock NP200 and 5.87 gears... prepping for Ford 390/T-18/divorced NP205 transplant.. .just because.
User avatar
Von
Expedition Ready
 
Posts: 946
Joined: Mon Dec 06, 2010 10:10 am
Location: Texas
Has thanked: 16 times
Have thanks: 34 times

Re: GM 3.5 timing chain too loose? (see video)

Postby Ed Mc. » Thu May 18, 2017 3:02 pm

Doesn't look that bad. Main thing is how much rotational slop does it have, i.e. if you turn the crankshaft, how many degrees does it turn before the cam turns. If minimal, then it's OK. My old 2.8 Trooper had at least degrees of slop with over 150,000 miles on it. It retarded the cam timing and had really good top end but never made any chain noise. It had almost 170,000 on it when I sold it and still ran good with the sloppy chain & didn't make any noise.

But one thing to consider, I would change the timing damper since the rubber shoes get hard then crack/fall off. After that the chain is metal-on-metal until it breaks. Check the shoes, if they're soft & pliable probably OK. But if hard as a rock, change it. The damper is cheap.

HTH........ed
'90 3.4 Troop LS;
'89 Troop RS (Exhaust Valve Challenged), now gone to a Good Home!
Yes, I am a Trooper-Holic!!!
Keep On Troopin' !
Ed Mc.
Almost Joe Isuzu
 
Posts: 2739
Joined: Thu Aug 14, 2003 1:26 am
Location: Poulsbo, WA
Has thanked: 5 times
Have thanks: 205 times

Re: GM 3.5 timing chain too loose? (see video)

Postby dryvr12 » Thu May 18, 2017 9:04 pm

Thanks, will check rotational slop and the condition of the damper.
Zack
Image

1988 Trooper LS 2.6L Auto to manual swap, Asin hubs, 228k+
http://forum.planetisuzoo.com/viewtopic.php?f=15&t=50707
LED gauges, sony h/u, alpine speakers, jl audio w3's, grant steering wheel, cup holders, procomp 98s

Odometer correction: http://forum.planetisuzoo.com/viewtopic.php?f=1&t=67546
Dome light fix: http://forum.planetisuzoo.com/viewtopic.php?f=17&t=62898
LEDs:http://forum.planetisuzoo.com/viewtopic.php?f=1&t=51643
User avatar
dryvr12
Zu Royalty
 
Posts: 1483
Joined: Sun Dec 12, 2010 12:33 pm
Location: Valparaiso, IN
Has thanked: 0 time
Have thanks: 43 times


Return to Other Vehicles

Who is online

Users browsing this forum: No registered users and 1 guest