Fender flares for an 86 Trooper II??

Use this forum to post about something that doesn't fit in any other topic (ex: link to the picture of the Toyota in a sink-hole)

Moderator: Staff

Fender flares for an 86 Trooper II??

Postby Skoyboy35 » Sat Sep 24, 2016 2:10 am

Hi, Does anyone know where to buy fender flares for a 1st gen Trooper II? Will any other fender flares from other makes/models fit? Thanks in advance.
Skoyboy35
Drives on Pavement
 
Posts: 5
Joined: Fri Sep 23, 2016 1:40 am
Has thanked: 0 time
Have thanks: 0 time

Sponsor
 

Re: Fender flares for an 86 Trooper II??

Postby gruff54 » Sat Sep 24, 2016 7:16 am

Use the search function.
This is a start.
viewtopic.php?f=2&t=57900&start=325&hilit=fender+flares
Or go to Robert's website. No 2 door flares, just 4 door.


Mike
'88 Trooper 2.6L 5 spd
'89 Trooper 2.6L 5 spd

For this post the author gruff54 was thanked by:
Gen1Trooper
gruff54
Trail Master
 
Posts: 685
Joined: Thu Feb 24, 2011 10:24 pm
Location: Central NC
Has thanked: 33 times
Have thanks: 56 times

Re: Fender flares for an 86 Trooper II??

Postby Gen1Trooper » Mon Sep 26, 2016 3:46 pm

If it's a 4 door I have 2 sets ready to ship.
User avatar
Gen1Trooper
Donor
Donor
 
Posts: 1779
Joined: Fri May 21, 2010 5:33 am
Location: So. Cal
Has thanked: 59 times
Have thanks: 52 times

Re: Fender flares for an 86 Trooper II??

Postby Skoyboy35 » Mon Sep 26, 2016 4:48 pm

I have a two door Trooper.... is there any way the can be manipulated to fit? The fronts should fit fine but the rears are different from the 2 to 4 doors? How much are you asking for your sets? Can you send pics? Do you know if any other sets that would fit. I saw a Mitsubishi montero and a dodge raider online and they looked to have very similar wheel wells. Thanks for your time!
Skoyboy35
Drives on Pavement
 
Posts: 5
Joined: Fri Sep 23, 2016 1:40 am
Has thanked: 0 time
Have thanks: 0 time

Re: Fender flares for an 86 Trooper II??

Postby Gen1Trooper » Tue Sep 27, 2016 2:55 am

4 door flares are $325 a set plus shipping.

If I had a 2 door here that I could check fitment on I could see if combining the 4 door flares for the rear doors and arches would work out. If so then it may be possible to combine the flares into one so new molds could be made. The only issues are having a 2 door to test with, having enough people that would want them for it to make sense cost wise and then having people that want them to actually buy them. The last one is the trickiest....
User avatar
Gen1Trooper
Donor
Donor
 
Posts: 1779
Joined: Fri May 21, 2010 5:33 am
Location: So. Cal
Has thanked: 59 times
Have thanks: 52 times


Return to General Chit Chat

Who is online

Users browsing this forum: No registered users and 1 guest