CV shafts

This forum is for the discussion of general Isuzu related information

Moderator: Staff

CV shafts

Postby joneill4 » Thu May 18, 2017 1:20 pm

I know that I have seen this covered, but I cannot find it. There are two different CV shafts available for my '94 rodeo. How do I determine which one I need before I tear into it?
1994 3.2L Rodeo 4x4
Westminster, MD
joneill4
Loyal P'up
 
Posts: 117
Joined: Sat Jul 25, 2015 4:57 pm
Has thanked: 2 times
Have thanks: 5 times

Sponsor
 

Re: CV shafts

Postby joneill4 » Thu May 18, 2017 7:03 pm

Rock Auto lists one as: Supplied without Inboard Housing; with 3-11/16" Ribbed Cylindrical Inboard Joint; Stamped NTN
and the other as: Supplied without Inboard Housing; with 3-9/16" Smooth Cylindrical Inboard Joint; Stamped NSK

Are they talking about the soup can? If so, it looks pretty smooth to me, but I cannot see any stamped letters. It looks like it has green paint if that helps.
1994 3.2L Rodeo 4x4
Westminster, MD
joneill4
Loyal P'up
 
Posts: 117
Joined: Sat Jul 25, 2015 4:57 pm
Has thanked: 2 times
Have thanks: 5 times

Re: CV shafts

Postby RickP » Thu May 18, 2017 7:48 pm

I don't know if it's the same as the early Troopers, but the difference on those is whether it was made in Japan or Taiwan. I can't remember off the top of my head which one is which, but I think the smaller ones were on the made in Japan vehicles. I would search to confirm.
User avatar
RickP
Mud King
 
Posts: 460
Joined: Mon Jan 11, 2016 3:27 pm
Location: Fayetteville, TN
Has thanked: 34 times
Have thanks: 42 times

Re: CV shafts

Postby joneill4 » Thu May 18, 2017 8:01 pm

i found the thread for troopers. My Rodeo was assembled in Indiana according to the VIN. I have been searching all day, but the Trooper thread was all I found.
1994 3.2L Rodeo 4x4
Westminster, MD
joneill4
Loyal P'up
 
Posts: 117
Joined: Sat Jul 25, 2015 4:57 pm
Has thanked: 2 times
Have thanks: 5 times


Return to General Isuzu Discussion

Who is online

Users browsing this forum: No registered users and 6 guests

cron