Isuzu SUV Forum banner

Isuzu trooper Roof problem

332 views 3 replies 3 participants last post by  Barcdawg 
#1 ·
viewtopic.php?f=1&t=58715
I read this thread and I assumed his trooper and all other troopers had factory drilled holes in the roof. I have my roof basket made. but the holes are not drilled there's dimples in the roof were the holes should be. is it safe to drill them out and tap the hole and put a bolt in it what size bolts should I use. my trooper is metric not imperial. due to the fact Im from canada
 
#2 ·
Take a screwdriver or punch and just press on the center of those dimples, should pop through the tape and paint to the threads. As for metric vs imperial, its a Japanese vehicle, so they are all metric! ;) I think its an M8 or M10 if I recall.
 
#3 ·
Yep, sometimes they have tape over the holes...
 
  • Like
Reactions: Barcdawg
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top