i will soon be installing indy4x swayaway torsion bars,i know how to adjust them.how do you change them.very little info here on changing them 8) recon
Since it's a Japanese car it's probably 27mm for the rest of the world but either socket should work.holger said:The Bolt head size is 1 1/16 " - at least, this socket size works perfectly.
Why not make Brandon's thread the sticky? It's titled properly and has less jibber jabber.RamAirZ said:Sticky'd and also grabbed the info from Brandon to throw in here:
thanks for the helpful link. 8) reconBansil said:Not much info but you can see the adjusters all the way out.
http://forum.planetisuzoo.com/viewtopic.php?t=32962&highlight=tbars
i removed my bj spacers on my 95 trooper,way to much postive cambertufftrooper said:Very good description and pics. Did you go with ball joint spacers, too? I just did the Indy4x TB's on my 89 Trooper, and not sure if I need to do the ball joint spacers. In your opinion, would you also install Indy4x ball joint spacers?
That's weird, my alignment shop had no trouble getting camber in spec with the spacers in place...I have the same suspension as you.recon said:i removed my bj spacers on my 95 trooper,way to much postive cambertufftrooper said:Very good description and pics. Did you go with ball joint spacers, too? I just did the Indy4x TB's on my 89 Trooper, and not sure if I need to do the ball joint spacers. In your opinion, would you also install Indy4x ball joint spacers?
at 3 inches,just bj flip on it.i did bj flip and bj spacer at 2.5 inch lift on my 95 pup.so it depends on the vehical.my 95 troop has wider stance longer control arms. 8) recon
on 2 inch lift on your truck a bj flip and an alignment,i wouldlittlegray said:Is a BJ Spacer required for 2" lift on the short IFS arms (like my 92 pickup)? I was planning to just flip the ball joint.