Isuzu SUV Forum banner

Lug pattern

3K views 6 replies 5 participants last post by  geoffinbc 
#1 ·
Whats the lug pattern/spacing on an 01 rodeo lse?
 
#3 ·
Yes, it's the standard old Chevy/Datsun/Toyota 6-lug x 5.5" bolt pattern used for years until the mfr's got crazy and changed the bolt center diameter.

If you're looking for replacement wheel(s), you must ensure that the center hole is at least 108mm (4.25") in diameter or it won't fit over the hubs.

Here's a pretty cool wheel cross-reference site:

http://www.roadkillcustoms.com/hot-rods ... z3JOjzx6kZ

And I stumbled up on this site which is neat 'cause it shows what years had what style of wheels, with diameter/width info:

http://www.finishlinewheels.com/ISUZU/RODEO/2001/

HTH..........ed
 
#4 ·
My 02 rodeo sport had 100mm openings for the hub on the OEM wheels.
 
#7 ·
The late modes with slip on rotors used unit bearings and did not have the big hub with drive flanges or locking hubs. They should fit most common wheels.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top